1. Three different soil test meters in one device; Measures moisture, pH/Acidity, and light.
2.  100% Accuracy; Easy to read moisture, pH and light levels; Perfect monitor for growing healthy plants.
3.  Takes the guesswork out of gardening; Know exactly when to water, amend your soil or adjust lighting.
4. Compact, portable & easy to use, just plug and use; Compact soil meter works indoor/outdoors.
5. Save water, energy and keep your plants, lawn, flower in top condition.
6. Measures moisture at root level.
7. No battery required, simple and convenient to use.

With Three-Way Soil Meter For Moisture, Light Intensity and pH Testing Meter, you can easily check on the condition of your plants. The moisture meter will quickly tell whether your plants are doing well. Firstly, let you know that dry and needs water or wet and could use a day to dry out, you will never over/under water your plants again. Secondly, it helps you to control pH level in soil, acidic or alkaline is suitable for your plants. Thirdly, testing whether plants getting adequate sunlight. Above all, equipped with this meter, you can give the best care to your plants and keep the soil and lawn healthy and happy. Note: Please remove probes from soil and wipe clean after each use.

Soil pH is one of the most important factors that can be overlooked in the garden. pH has impacts on the availability of nutrients and of the plant’s ability to take them up. If the pH of your garden soil is not in the optimal range for the plants you are trying to grow you may end up having issues. Often plants grown in a soil that does not have the optimal pH don’t produce or if they do their harvests are low while the plant may look stressed. On today’s joint episode between the Testing Garden Assumptions and Urban Garden Series, I am going to take a look at soil pH, how to easily measure it and how you can adjust the pH over time if need be. pH is measured on a 14 point scale with 0 being the most acidic 7 neutral and 14 the most basic.

Three Way Soil Meter With PH Detector is a Perfect tool to test the soil conditions (Moisture/Light/ PH) of fruits, flowers, vegetables, shrubs, etc. Its an Ideal and necessary tool for gardeners, vegetable and fruit growers, and all those who plant trees and grass. The meter can be Simply inserted into the soil and switch to the setting you want to measure and read the scale.

Instructions:

1.Remove any obstruction to the soil that requires testing, such as surface soil, grass, leaves, pebbles, etc. If the soil is dry or contains too much fertilizer, sprinkle some water onto the soil and leave for 25-30 minutes before testing.

2.Before using the tester, be sure to thoroughly clean its metallic surface with a piece of whetting cloth. When using a brand-new tester, we advise you to insert it into the soil a few times before taking your reading. This is in order to remove any oily impurities from its metallic surface that may affect the accuracy of your soil moisture reading.

3.Insert the meter directly into the soil that requires testing, embedding its metallic surface completely and tamping down the surrounding soil so that it adheres closely to the meter’s metallic electrode surface.

About ten minutes after inserting the meter in the soil, the pointer will indicate the correct value of moisture.

The meter may sometimes register different values depending on the soil condition, adhesion to the meter’s metallic surface, moisture content, etc. Therefore it is advised you take an average of several measurements.

4.After use, wipe the plates clean of soil or moisture.

HOW TO PAY